Meatailt gnìomhachas Mit-eidheann Primer Seulachaidh Latex Acrylic adhartach le cumhachd fìor mhath
Iarrtas
Tha deagh ghleusadh aige ri fo-stratan stàilinn agus prìomhairean stèidhichte air uisge, agus deagh thogalaichean fiosaigeach is meacanaigeach às deidh don tonn peant tiormachadh.
5. Tha gleidheadh aotrom sàr-mhath agus gleidheadh dath aig an fhilm peant às deidh tiormachadh.
Iarrtas a thathar a ’moladh Tha e freagarrach airson dìon drèanaidh làraidhean, pàirtean innealan, uidheamachd gnìomhachais aotrom, msaa far a bheil feum air dìon àrd.
Dàta teicnigeach Dath assorted
Uachdar tioram (mì-ghoireasachd 50%) 15 ℃ C <1h ； 25'C <0.5h
Tioram tioram (taiseachd 50%) 15'C <48h; 25 ° C <24h
Buaidhean "kg.cm" 50
Cha bhith film peant uisge (50 ± 5μm) 72h a ’brùthadh, chan eil e a’ cuideachadh le tuiteam, chan e meirgeadh.
Cruas 0.3 (pendulum dùbailte) seilbh meacanaigeach a ’dèanamh deuchainn air tiugh film (23 ± 3jμm)
Adhesion (Hegelian) Ìre 1
Làimhseachadh uachdar Bu chòir uachdar an stuth còmhdaichte a bhith saor bho taiseachd, ola, carbon searbhagach agus uinnseann.
Mion-fhiosrachadh luath
Stàilinn le craiceann ocsaid: Bu chòir dòighean spreadhaidh no spreadhadh gainmhich mar ghiullachd gu ìre Sa2.5, far nach urrainnear spreadhadh gainmhich a dhèanamh gu meacanaigeach no
Làimhseachadh gu ceimigeach gus na guailnean briste a tha air bhog a thoirt air falbh.
Stàilinn gun chraiceann ocsaid: sandblasted (shotblasted) gu Sa2.5 no innealan bleith dealain le èadhar gu St3.
Welding, gearradh lasair no ceartachadh obair-teine de raointean bogha loisgte: a ’bleith gu ìre St3.
Stuth bunaiteach le seann fhilm peant: cuir às seann seann ghràineanan peant agus meirge, agus gainmheach gu St3 le innealan gainmhich adhair no dealain.
Faodar pasgan peantaidh àbhaisteach a chleachdadh le primer stèidhichte air uisge H902, no a chleachdadh leis fhèin mar chòta sgeadachaidh coitcheann, no a chleachdadh le seòrsachan eile de thoraidhean primer (feumar a mhaidseadh airson dearbhadh).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
